Laumas TFPS Load Cell Mounting Kit

The Laumas TFPS load cell mounting kit is a mechanical mounting assembly for compatible Laumas shear and bending beam load cells in industrial weighing systems. It is used where the weighing structure needs controlled load introduction, lateral restraint and anti-tilt support at the load cell position.

TFPS2000 and TFPS2000INOX variants are available, both with a listed maximum static load of 2000 kg. GNW lists the kit for use with FTK, FTKL, FTP, FTP-P and FTZ load cells. Before specifying the kit, engineers should verify the installed load cell model, system capacity, support structure and site conditions.

The TFPS mounting kit is particularly relevant for vessels and machinery where vibration or movement can affect the load path. The ball joint arrangement provides restraint against lateral forces and anti-tilt movement, while also helping compensate for misalignment between support plates. This is important in tank, hopper and silo weighing systems where the mechanical installation has a direct effect on weighing repeatability and load cell life.

Engineering Use

Correct mounting is a critical part of any load cell installation. The TFPS kit supports practical installation by providing an adjustable-height arrangement, helping installers set the structure correctly during commissioning or replacement work. It also gives maintenance teams a defined mechanical interface when servicing compatible Laumas weighing assemblies.

• Product type: load cell mounting kit for industrial weighing systems
• Variants: TFPS2000 and TFPS2000INOX
• Maximum static load: 2000 kg
• Typical uses: silos, tanks, hoppers and mixing machines
• Mechanical function: lateral restraint, anti-tilt support, misalignment compensation and height adjustment

The galvanised and stainless steel options allow the mounting kit to be matched to the installation environment. For replacement projects, check the existing kit reference and load cell type before ordering. For new builds, confirm the mounting arrangement at design stage to ensure the structure, load cell and mounting kit are specified as a complete weighing assembly.