Coating Thickness Gauge Accessories

Original Sauter coating thickness accessories, including F, N and FN replacement sensors, adjustment foils, data-transfer software and an RS-232-to-USB adaptor. Select by gauge model and part number.

View Products

Sauter TB Coating Thickness Meter - GNW Instrumentation

Coating Thickness Meters

Collection

6 products

Sauter ATG 01 Sensor, Layer Thickness | GNW

Sauter ATG 01 Type FN Coating Thickness Sensor

£160.95

Kern AFH 12 Converter RS-232 to USB

£105.45

Sauter ATB-US07 Coating Thickness Adjustment Foils

£127.65

Sauter ATC-01 Data Transfer Software

£111.00

Sauter ATE 01 Sensor, Layer Thickness | GNW

Sauter ATE 01 Type F Coating Thickness Sensor

£128.76

Sauter ATE 02 Sensor, Layer Thickness | GNW

Sauter ATE 02 Type N Coating Thickness Sensor

£138.75

Sauter Coating Thickness Sensors & Accessories

This collection brings together six accessories for compatible Sauter coating thickness meters. ATE 01 is a Type F sensor for suitable coatings on steel; ATE 02 is Type N for compatible coatings on non-ferrous metals. The ATG 01 external FN sensor serves supported TG gauges and combines the two measuring principles.

The ATB-US07 adjustment foil set covers nominal thicknesses from 20 to 2,000 µm for use with compatible coating gauges. ATC-01 supports transfer of instrument measurements to Excel where the appropriate interface is available. AFH 12 converts an RS-232 connection to USB for supported instruments.

Choose by the exact model and manufacturer's accessory reference rather than connector appearance. Use the TB, TE, TG or JCT accessory collections for model-specific options. Adjustment foils support setup and checks but do not substitute for a traceable calibration certificate.

Understanding F, N and FN Sensors

An F sensor uses magnetic induction to measure suitable non-magnetic coatings on ferrous bases such as steel. An N sensor uses eddy-current measurement for appropriate non-conductive coatings on conductive non-ferrous bases such as aluminium. FN combines both methods in a compatible instrument.

Sensor compatibility depends on the actual gauge family, not just the measurement principle. Check the manufacturer's accessory list before purchasing a replacement. Reference foils can be used for local adjustment; their stated tolerance is not the same as the gauge's overall measurement uncertainty.

F and N Replacement Sensors

ATE 01 Type F and ATE 02 Type N sensors suit compatible TB and TE coating thickness meters. Select the probe for the underlying metal.

FN Sensor and Adjustment Foils

ATG 01 is the external FN sensor for supported TG gauges. ATB-US07 provides a set of adjustment foils between 20 and 2,000 µm.

Software and Data Interfaces

ATC-01 transfers data from supported Sauter coating gauges. AFH 12 converts RS-232 to USB where approved for the measuring instrument.

Learn more

Coating Gauge Accessory Applications

Replace damaged measuring heads, adjust instruments around the expected coating thickness and transfer results from supported gauges for inspection records.

Probe Replacement

Replace a worn or damaged F, N or FN sensor using the correct Sauter part number for the instrument.

Local Coating Adjustment

Use compatible ATB-US07 foils and the manufacturer's procedure when checking or adjusting a gauge around a target coating thickness.

Measurement Data Export

Export stored coating measurements using ATC-01 software and a suitable instrument interface; check Windows and cable compatibility.

Choosing Coating Thickness Gauge Accessories

Start with the instrument's model code and manufacturer accessory reference. Check substrate measurement method for sensors, nominal foil range for adjustment and interface requirements for data-transfer products.

Confirm the Gauge Model

Check TB, TE or TG model compatibility rather than selecting a sensor solely by appearance. JCT has a different integrated measurement arrangement.

Match F, N or FN Measurement

ATE 01 is Type F for suitable coatings on ferrous substrates; ATE 02 is Type N for compatible non-ferrous substrates; ATG 01 is Type FN for supported TG gauges.

Check the Adjustment Range

ATB-US07 foils cover nominal values from 20 to 2,000 µm. Follow the instrument's instructions and account for the foil set's stated tolerance.

Verify Software and Interface

ATC-01 transfers measurements from supported Sauter gauges; AFH 12 is an RS-232-to-USB converter. Check exact model, cabling and operating system compatibility.

Coating Thickness Accessory FAQs

Answers to common questions about Sauter replacement probes, adjustment foils and data connections.

Can I use an ATE 01 or ATE 02 sensor on any Sauter coating gauge?

No. ATE 01 and ATE 02 are external F and N sensors for compatible instrument models, including selected TB and TE gauges. Check the part number and manufacturer compatibility before ordering.

What is the difference between ATE 01, ATE 02 and ATG 01?

ATE 01 uses the F method for ferrous metals, ATE 02 uses the N method for suitable non-ferrous metals, and ATG 01 is an FN sensor for compatible TG models.

Are ATB-US07 adjustment foils a calibration certificate?

No. Adjustment foils support local adjustment and checks. A traceable calibration of the complete gauge requires its own appropriate calibration procedure and certificate.

Will ATC-01 and AFH 12 work with every gauge or computer?

No. ATC-01 requires a supported measuring instrument and compatible interface, and AFH 12 is for suitable RS-232 connections. Check the gauge model and software operating-system support.