Bending Beam Load Cells

Bending beam load cells suit tanks, hoppers, filling machines and compact process equipment where a lower-capacity sensor is installed in a controlled mounting arrangement.

This Laumas range includes the FCAL, FCOL and FCK families. Compare capacity, mounting dimensions, construction, environmental protection and compatibility with the connected weighing electronics.

3 products

Laumas FCK Bending Beam Load Cell

From £204.00

Laumas FCOL Bending Beam Load Cell

From £204.00

Laumas FCAL Bending Beam Load Cell

From £264.00

Bending beam load cells for compact process weighing

Bending beam load cells measure force through the controlled deflection of the sensing beam. Their compact format works well in lower-capacity tanks, hoppers, dosing equipment and production machinery.

The sensor needs a firm support and a mounting arrangement that directs force correctly. Suitable load-cell mounting hardware can help protect the weighing point from side loading and normal structural movement.

The signal can be displayed by a weight indicator or integrated into machinery through a weight transmitter. For other mechanical formats and capacities, compare the wider load cell range.

Bending beam load cell selection

Bending beam load cells are commonly used where a compact sensor must measure lower or medium loads in tanks, hoppers, filling equipment and machinery. The load is applied to one end of the beam while the other end is fixed to a rigid support.

Capacity selection should include the dead weight of the structure as well as its contents. The mounting arrangement must keep the force aligned with the intended load direction and prevent pipework or surrounding frames from bypassing the sensor.

For a replacement, compare the mounting centres, overall dimensions, rated output, wiring, cable and environmental protection with the existing unit.

Compact load measurement

Their compact shape suits tanks, hoppers and machines where installation space is limited and the load can be introduced through a fixed beam arrangement.

System integration

Check excitation, rated output, wiring and cable against the selected indicator or transmitter. Multi-cell vessel systems may also require a junction box.

Installation compatibility

For replacement work, match capacity and dimensions closely. New equipment should provide a rigid support, correct load introduction and access for calibration.

Learn more

Typical applications

Bending beam designs are useful in compact process equipment where weight or force needs to be measured without a large structural assembly.

Small vessel weighing

Small tanks and hoppers can use one or more sensors for batching, stock checks and controlled discharge.

Filling and dosing machinery

Filling and dosing machinery can use the measured weight to stop or adjust the process at the required quantity.

Conveyors and compact platforms

Conveyors and compact platforms can incorporate bending beam sensors where the frame transfers the load through defined weighing points.

OEM machinery and upgrades

OEM builders can integrate the sensor into packaging, test and production machinery when the mounting and load path are designed around the selected model.

How to choose

Start with the working load and mechanical arrangement, then compare dimensions, construction, site conditions and electrical output.

Capacity and load range

Include the vessel, platform or fixture as well as the material being weighed. Allow for uneven loading and normal process variation.

Mounting format

Check fixing holes, mounting centres, loading point and available clearance. The support must be rigid and free from binding.

Operating environment

Select construction and protection suited to moisture, cleaning, dust, chemicals and temperature at the installation site.

System electronics

Confirm excitation, rated output, wiring and cable requirements against the indicator, transmitter or control system.

Bending beam load cell FAQs

These answers cover the practical checks for selecting or replacing a bending beam load cell.

What are bending beam load cells used for?

They are commonly used in tanks, hoppers, filling machines, compact platforms and OEM process equipment.

How do I choose the correct capacity?

Compare the maximum working load plus dead weight, then allow for uneven loading and the number of weighing points.

Can I replace an existing bending beam sensor with a similar model?

Only where capacity, dimensions, mounting, output, wiring and environmental suitability match the existing installation.

Do bending beam load cells need mounting accessories?

Many vessel and hopper installations benefit from suitable mounting hardware to control the load path and accommodate normal movement.